Catalog Request Company Info Contact Us Home Page
What's Your Pumping Problem? High Flow Low Head Solution Low Flow High Head Solution High Inlet Pressure Solution Heavy Duty Submersible Solution Contact Us Vortex Solution Small Submersible Solution Vertical Sump Solution Self Priming Solution Pedestal Mount Solution Closed Coupled Solution Materials Used for Pumps Types & Sizes of Pumps Nuclear Waste Cleanup In Line
High Inlet
Pressure Pumps

Pump Curves available at
Pump a proprietary water-like substance in a reverse osmosis system at 1000 PSI inlet pressure.
Model: 4000 F-HD
Pedestal Mount, End Suction,
Heavy-Duty Centrifugal

Material: 316L Stainless Steel
Size: 1.5 x 1 FNPT
  1. Performance: 32 GPM at 60 PSI boost.
  2. Seal: Crane type 8B1 EPDM elastomers, special carbon vs. silicon carbide mating faces, 316 S/S metal parts.
  3. Motor: 10 HP, 3450 RPM.
  4. Group II bearing frame.
  5. Hydrostatic test at 1500 PSI for one hour.
  6. Suitable for CIP cleaning with caustic & acid.



At 298 PSI inlet pressure, produce 80 PSI boost at 36 GPM of 100°C CBS carbamate solution.
Model: 4000 F-HD3 (AA-2)
  1. All commercially pure wrought TITANIUM construction, ASTM Gr. 2 (Shaft: all ASTM GR. 4).
  2. Crane type 8 B1 blanced mechanical seal: All metal part TITANIUM, carbon vs. silicon carbide, viton elastomers.
  3. 1-1/2 x 1 RF 300# FL ports.
  4. ANSI group II oil lube bearing pedestal.
  5. NOL motor: 10 HP, 3450 RPM, TEFC, chemical processing.
  6. Certified QHP and hydrostatic (800 PSIG for 1 hr.) tests.

Department of Energy Application: Deionized water at 450°F, 1250 PSI inlet pressure, requires 65 GPM @ 141 FT TH (50 PSI boost at 0.82 SG).

Model: 6000 F-HD3 (A10-2B)
Material: 316 Stainless Steel
Size: 2 (900#) RF FL x 1 (1500#) RF FL
  1. Centerline mount, heavy-duty, high pressure, high temperature design.
  2. Group IIB bearing pedestal with bearing frame cooler connections and vented oil level gauge w/thermometer.
  3. Crane type 8B1 H (1-7/8") cartridge type mechanical seal w/pumping ring and throttle bushing.
  4. Crane/Lemco HE-636-WH heat exchanger and piping per ANSI 7323 & API 23.
  5. Motor: 10 HP, 1750 RPM, high efficiency ODP, 215T frame.
  6. Fabricated channel steel base (27" x 58").

Chemical plant constructor required “Heavy-Duty Pedestal Mount Hydrocarbon Liquid Centrifugal Pump” for liquified natural gas facility: 326 PSI inlet pressure (duty: 96 GPM @ 15 PSI boost @ 0.54 SG).

Model: 3000F-HD3 (A10-2)
Heavy-Duty Pedestal Mount (Group II)
Size: 2 x 2 RF FL (300#)
  1. 304 Stainless Steel construction.
  2. Enclosed impeller: 4-1/2" diameter.
  3. John Crane type 8B1-40B (1-3/4") balanced mechanical seal (carbon vs. silicon carbide mating faces, buna-n elastomer and 304 S/S metal parts.
  4. Baldor chemical processing motor: 3 HP, 3450 RPM.
  5. 316 Stainless steel-epoxy coated channel steel base with S/S guard.
  6. Certified tests: Performance (QHP), Hydrostatic (520 PSIG), Leak, Run-in, Motor check-out.
Recirculating pump for “heavy water” (0.89 SG & 73 Cp viscosity), designed for 250°C (482°F) and 700 PSI inlet pressure: 8 GPM @ 40 FT TH (19.5 PSI boost).
Model: 2000F-HD3 (AA05-2)
Material: 316 Stainless Steel
Size: 3/4" x 1/2" RF FL (600#)
  1. Extra heavy-duty construction, fabricated from type 316 Stainless Steel round bar and plate stock.
  2. Group II bearing pedestal, oil lube; no cooling required.
  3. John Crane type 8 B-1 balanced mechanical steel: carbon vs. silicon carbide mating faces, viton elastomers and 316 Stainless Steel metal parts.
  4. Crane/Lemco heat exchanger with piping per plan 21 (required 14 GPM of 80°F cooling water).
  5. Certified hydrostatic test: 1100 PSIG.



Chemical manufacturer must batch circulate an abrasive slurry (water with 10% barium hydroxide and 2% titanium dioxide), 392°F, 250 PSI inlet pressure, 1.1SG, pH 14: 200-300 GPM @ 20 PSIG boost.
Model: 4000 F-HD3 (A70-2B)
Size: 4 x 3 RF FL (300# rating)
Motor: 10 HP, 1760RPM, explosion-proof, 215T
  1. Material of construction: Commercially pure Titanium, ASTM grade 2. (Titanium Shaft: One piece solid round bar, ASTM Grade 4).
  2. Mechanical seal: A.E.S. type DMSF double cartridge (TC vs. SIC and SIC vs. carbon mating faces, Kalrez and AFLAS elastomers, Titanium sleeve, Hastelloy C springs, 316L Stainless Steel gland) x 1.875".
  3. Bearing isolators on pedestal with synthetic oil.
  4. Seal cooling system: Cast iron heat exchanger with Titanium coil and Titanium piping (Plan 53 double seal vessels supplied by customer).
  5. Certified hydrostatic test: 400 PSIG.