|
Corcoran Pumps are available in a wide range of corrosion resistant materials.
Normally
made from wrought metal that is uniformly dense and essentially porosity
free.
They are formed and fabricated using techniques developed by manufacturers
of pipe, tanks and other process equipment.
The use of
wrought metal in Corcoran pumps often offers other advantages over cast
alloys. Two obvious advantages are higher density and better mechanical
properties. In many instances the wrought metal has significantly higher
corrosion-resistance than cast metal of similar composition.
|
|
Material
|
Fluid
Applications
|
| Type
316 Stainless |
Cleaners,
caustic materials, salt solutions, chlorinated solvents, general
corrosion-resistant usage. Photographic chemicals, deionized water,
fatty acids, phosphoric acid, citric acid and lactic acid. |
| Carpenter
20Cb 3 |
Sulfuric
acid, phosphoric acid, chromic acid, plating solutions |
| Hastelloy
B and C |
Hydrochloric
acid, Ferric Chloride |
| Titanium |
Nitric
acid, chrome sulfuric acid, chlorine water, ferric chloride, hot
salt solution, sea water |
| Monel |
Sea
water, hydrofluoric acid |
| Nickel |
Hot
caustic solutions |
| Meta-fitted
PVC (CPVC) |
Subject
to temperature and pressure limitations |
|
|
